A |
B |
C |
D |
E |
F |
H |
I |
N |
O |
P |
R |
S |
T |
V |
W |
Keyword:
I
Immersion Cooler
is an additional chiller with a flexible tube and a cooling coil (evaporator) for immersion cooling of any desired bath.
Immersion Thermostat (CC-E, MPC-E)
is a thermostat that can be combined with a bath and to form a complete unit. Immersion thermostats are equipped with a screw clamp to attach them to any desired bath wall or can be fixed on a stand. Immersion thermostats can also be fitted to a bridge and mounted permanently in a bath.
Industrial Thermostats (UC-Hx)
are refrigerated circulators (Unichiller®) with factory fitted heating. The units have high cooling, heating and pump powers which allow quick cooling and heating rates due to the small internal volumes. They are ideal for temperature control in process technology, within a smaller temperature range (-20..120°C).
Interface, analogue
is used to input the set value or to output the actual value of temperature in analogue form, generally in the form of a current (0/4-20 mA or 0-10 V).
Interface, digital
is used to transfer data between connected units in digital form via data cable. The set and actual temperature values are the main items transferred. The serial RS 232 interface allows a point-to-point connection. This means that at anyone time only two participants such as the thermostat and the PC can communicate with each other via the interface. The RS 485 interface is an addressable interface where up to 32 participants can be connected. Each participant of the bus system has its address.
Intrinsic Temperature
is the operating temperature of a heating thermostat that is reached when the heating is switched off. lt depends on the pump power, thermofluid (viscosity and density) used and the insulation of the thermostat, e.g. with or without a cover on the bath.
